Manuscripts

Recent Papers

Project Sustainable A.I Robot

Since Robotics is the field concerned with the connection of perception to action, Artificial Intelligence must have a central role in Robotics if the connection is to be intelligent.

Published by: Abhishek Anand Lal

Author: Abhishek Anand Lal

Paper ID: V2I5-1154

Paper Status: published

Published: May 9, 2017

Full Details

Costing and Estimation

Estimating is the technique of calculating or knowing the various quantities and the expected Expenditure to be experienced on a particular work or project. In case the funds present are less than the calculated cost the work is done in part or by deducting it or specifications are altered, the following requirement are worth essential for preparing an estimate. Drawings like plan, elevation and sections of important points. Detailed specifications about work men ship & properties of materials etc. A cost estimate is the approximation of the cost of a program, project, or operation. The cost estimate is the product of the cost estimating process. The cost estimate has a single total value and may have identifiable component values. A problem with a cost overrun can be avoided with a credible, reliable, and accurate cost estimate. A cost estimator is the professional who prepares cost estimates. There are different types of cost estimators, whose title may be preceded by a modifier, such as building estimator, or electrical estimator, or chief estimator. Other professional titles may also prepare cost estimates or contribute to cost estimates, such as quantity surveyors, cost engineers, etc Standard of construction can be achieved by careful supervision and selecting proper specifications whereas for Economy, planning is a must. The total quantity of various materials used in construction, if known before hand, can help the planning towards economy. .

Published by: Maaz Allah Khan, Tejasvi Raj Barrister, Yusuf Haider

Author: Maaz Allah Khan

Paper ID: V2I5-1153

Paper Status: published

Published: May 9, 2017

Full Details

Use of Plastic Waste in Road Construction

Plastic waste is one such resource, a major component of solid waste which is abundantly available and disposed of without proper treatment. There has been an exponential growth in municipal plastic waste disposal especially in urban areas which deteriorates the beauty of the landscape. Plastic was found to be an effective binder for bitumen mixes used in flexible pavements.

Published by: Azmat Shaikh, Nabeel Khan, Faisal Shah, Gaurav Kale, Devendra Shukla

Author: Azmat Shaikh

Paper ID: V2I5-1146

Paper Status: published

Published: May 9, 2017

Full Details

Study of Parenteral Antibiotics Used In Post-Operative Perforation Duodenal Ulcer in Department Of Surgery

A perforation duodenal ulcer occurs when an area of erosion eats right through the gut wall in the part of the digestive system leading from the stomach, knows as the duodenum .the life-threatening condition known as peritonitis may follow, where inflammation and infection spread rapidly into the abdominal cavity affecting the entire major organ. Ulcer usually has a history of indigestion perhaps involving reflux , where stomach acid passes up into the throat .with a perforated duodenal ulcer there may be a sudden pain in the centre of the chest just below the breast bone, become a more generalised abdominal pain and emergency surgery is generally required to repair the gut. Objective: Study of parental antibiotics used in post-operative perforation duodenal ulcer in a surgery department Material method: Prospective observation study, all the patients admitted in gynecology ward in RMMCH during in 4 month study period from October 2016 to January 2017 who has compliance with inclusion and exclusion criteria. Results: The total number of 40 patients. The male (85%) patients are mostly affected when compared to female patients (15%) with duodenal ulcer. Among the study population, more patients with duodenal perforation were the under age group of 51-61 years. Followed by the elderly patient with age group above sixty. The majority of the parenteral antibiotics mostly prescribed in metronidazole >amikacin >cefotaxim > ciprofloxacin > gentamycin > cefixime.

Published by: Junior Sundresh .N, K. Suresh, H. Sudheer Kumar, Dr. S. Narendran

Author: Junior Sundresh .N

Paper ID: V2I4-1172

Paper Status: published

Published: May 9, 2017

Full Details

Car Pooling Using Global Position System

The Carpooling is not a new concept in the field of car sharing. Decades ago, when there were oil crises in Europe, people were encouraged to share their vehicles. The carpooling application will try to reduce the cost of the journey for travelers who commute to work daily which will not only save their money but this will also reduce the usage of most important non-renewable resource we have i.e. fuel, which is declining at a rapid pace. Our application will have two kinds of users, Firstly, the travelers (drivers) who use their own vehicle (car only for now) to go to work daily and in need of some fellow passengers on their way to accompany them. Some owners might want someone to accompany them for the entire journey ie from source to destination. These drivers can use our application to create their profiles as driver under “offer a ride” section and mention their route to work  they are expecting from passengers, car they have (hatchback, sedan, SUV), number of fellow passengers they need and details of their time when leave from home for work as well as when they leave from office.

Published by: Justin K Williams, A. Benazir Begum

Author: Justin K Williams

Paper ID: V2I5-1162

Paper Status: published

Published: May 9, 2017

Full Details

LCD Overdrive Frame Memory Compression Using Adaptive Block Truncation Coding

In order to reduce the frame memory usage in LCD overdrive, there is basic technique called block truncation coding (BTC) is commonly used due to its efficient coding and low implementation cost. However, there are some limitation of BTC that causes severe perceptual artifacts and degrades overdrive performance. To overcome the problem of BTC here we propose an adaptive multi-level BTC (AM-BTC) in this paper. The AM-BTC as suggested firstly overcomes the limitation by adaptively selection of 2-level or 4-level BTC according to the edge property of the coding block. Then, to reduce the bit rate of AM-BTC we improve the 2-level and 4-level BTCs by using only luminance bit-map to represent three color bit-maps, depending upon the color bit-maps advancement can be done . Moreover, as a result of this paper different types of images are compared for different PSNR values.

Published by: Gagan Gupta, Mr. S. Sugumaran

Author: Gagan Gupta

Paper ID: V2I5-1145

Paper Status: published

Published: May 4, 2017

Full Details

Management Information System

It has for a while been widely accepted that an appropriate mathematical model for studying data types is the category of domains, i.e. consistently complete algebraic cops’, and continuous functions. What has not faired as well in acceptance is a method of representation, or implementation, of domains. The most recent method of representation —Information Systems—was introduced by Dana Scott and is gaining acceptance, as indicated by its appearance in a number of recent research papers. The role of information, as an essential tool for managers in planning and decision making. MIS is a well co‐ordinated information system, a database that is to provide management with needed information to plan and make decisions. Modern technology has further made the resort to MIS in management imperative because of the changing circumstances and environment. Also identifies some problems which can hinder effective use of MIS.

Published by: Pravin Bendre, Pooja Murukate, Vrushali Desai, Damini Dhenge, Bhagyashri Kelkar

Author: Pravin Bendre

Paper ID: V2I4-1178

Paper Status: published

Published: May 1, 2017

Full Details

Security Sensors for Protection in Smart Homes Using IOT

Now a day’s due to huge advancement in wireless sensor network and other computation technologies, it is possible to provide flexible and low-cost home automation system. However, there is no any system in the market which provides home automation as well as error detection in the device efficiently. The project Proposes an efficient implementation for IoT used for monitoring and controlling the home appliances via Android App. Home automation system uses the portable devices as a user interface. They can communicate with home automation network through an Internet gate, by means of low-power communication protocols like ZigBee, Wi-Fi etc.

Published by: Nirav Naginbhai Gurjar

Author: Nirav Naginbhai Gurjar

Paper ID: V2I4-1199

Paper Status: published

Published: April 29, 2017

Full Details

5 Pen Pc Technology: A Review

“5 pen technology :A Review” is a recent innovation in the area of pen computing. Pen computer is a field that outline computer like user interface that makes use of pen like devices that will be suitable to use in evaluation to modern systems (such as laptops, desktops etc.).5 Pen PC technology consists of 5 pen like devices which are used for providing functions of a CPU, a projector, a virtual keyboard, a camera, and communication functions of a cellular phone. All the 5 pens are connected to each other via wireless technology if possible Bluetooth i.e. 802.11 BG .The whole set of 5 pen technology is connected to the internet via the cellular phone pen.5 pen PC technology is also known as P-ISM i.e. Pen-style Personal Networking Gadget Package. Keywords— P-ISM ,display , camera ,CPU pen , Battery ,Virtual Keyboard ,Bluetooth , Wireless Connectivity , etc.

Published by: Pradnya Bedke, Pallavi Kulkarni, Rishikesh Narvekar, Neha Garagte, Gautami Nilpankar

Author: Pradnya Bedke

Paper ID: V2I4-1170

Paper Status: published

Published: April 29, 2017

Full Details

Bionic Arm

Functional prosthetics are the most sought after solutions to any physical trauma which leads to amputation of the limbs. In this technology, we aim to combine leading sensing techniques to use the user’s residual limb to power the prosthesis and advanced processing techniques to ensure optimum operation. The already present prosthesis either serve aesthetic purposes or are dependent on invasive surgery which complicates the integration of the system. The two main points to note in functional prosthetics is choosing the best sensing technique among the many present today and also arriving at the best possible way to process these signals to power the prosthetic i.e. the bionic arm. The main objective of this project is to design a low-cost Bionic Arm using myoelectric signal sensing and advanced signal processing. The main aim of this project is to provide an advanced model of the Bionic arm that can restore natural movement to all those who have undergone upper limb amputations, at an effective cost. The proposed model senses the muscle movement of the user and powers the artificial hand in real time, thus blurring the lines between physical ability and disability.

Published by: Saikaran Praveen, Siva M P, Vijay Chandrasekar C K, M Maria Dominic Savio

Author: Saikaran Praveen

Paper ID: V2I4-1195

Paper Status: published

Published: April 29, 2017

Full Details